Step 2 - Installing InfluxDB Enterprise data nodes
This page documents an earlier version of InfluxDB Enterprise. InfluxDB Enterprise v1.9 is the latest stable version.
InfluxDB Enterprise offers highly scalable clusters on your infrastructure and a management UI for working with clusters. The next steps will get you up and running with the second essential component of your InfluxDB Enterprise cluster: the data nodes.
If you have not set up your meta nodes, go to Installing InfluxDB Enterprise meta nodes. Do not proceed unless you have finished installing your meta nodes.
Data node setup description and requirements
The Production Installation process sets up two data nodes, each running on a dedicated server. You must have a minimum of two data nodes in a cluster. InfluxDB Enterprise clusters require at least two data nodes for high availability and redundancy.
Note: Although there is no requirement that each data node runs on a dedicated server, InfluxData recommends this for production installations.
See Clustering in InfluxDB Enterprise for more on cluster architecture.
License key or file
InfluxDB Enterprise requires a license key OR a license file to run.
Your license key is available at InfluxPortal.
Contact support at the email we provided at signup to receive a license file.
License files are required only if the nodes in your cluster cannot reach
portal.influxdata.com on port
Data nodes communicate over ports
For licensing purposes, data nodes must also be able to reach
If the data nodes cannot reach
portal.influxdata.com on port
license-path setting instead of the
license-key setting in the data node configuration file.
InfluxDB Enterprise does not function as a load balancer.
You will need to configure your own load balancer to send client traffic to the
data nodes on port
8086 (the default port for the HTTP API).
Data node setup
Step 1: Modify the
Add your servers' hostnames and IP addresses to each cluster server’s
file (the hostnames below are representative).
<Data_1_IP> enterprise-data-01 <Data_2_IP> enterprise-data-02
Before proceeding with the installation, verify on each meta node and data node server that the other
servers are resolvable. Here is an example set of shell commands using
ping -qc 1 enterprise-meta-01 ping -qc 1 enterprise-meta-02 ping -qc 1 enterprise-meta-03 ping -qc 1 enterprise-data-01 ping -qc 1 enterprise-data-02
If there are any connectivity issues resolve them before proceeding with the installation. A healthy cluster requires that every meta and data node can communicate with every other meta and data node.
Step 2: Set up, configure, and start the data services
Perform the following steps on each data server.
2.1 Download and install the data service
Ubuntu & Debian (64-bit)
wget https://dl.influxdata.com/enterprise/releases/influxdb-data_1.5.4-c1.5.4_amd64.deb sudo dpkg -i influxdb-data_1.5.4-c1.5.4_amd64.deb
RedHat & CentOS (64-bit)
wget https://dl.influxdata.com/enterprise/releases/influxdb-data-1.5.4_c1.5.4.x86_64.rpm sudo yum localinstall influxdb-data-1.5.4_c1.5.4.x86_64.rpm
2.2 Edit the configuration file
/etc/influxdb/influxdb.conf file, complete these steps:
hostnameat the top of the file and set it to the full hostname of the data node
[http]section and set it to
[http]section and set it to a long pass phrase that will be used to sign tokens for intra-cluster communication. This value must be the same for all data nodes.
[enterprise]section to the license key you received on InfluxPortal or
[enterprise]section to the local path to the JSON license file you received from InfluxData.
license-path settings are mutually exclusive and one must remain set to the empty string.
# Change this option to true to disable reporting. # reporting-disabled = false # bind-address = ":8088" hostname="<enterprise-data-0x>" [enterprise] # license-key and license-path are mutually exclusive, use only one and leave the other blank license-key = "<your_license_key>" # Mutually exclusive with license-path # The path to a valid license file. license-key and license-path are mutually exclusive, # use only one and leave the other blank. license-path = "/path/to/readable/JSON.license.file" # Mutually exclusive with license-key [meta] # Where the cluster metadata is stored dir = "/var/lib/influxdb/meta" # data nodes do require a local meta directory [...] [http] # Determines whether HTTP endpoint is enabled. # enabled = true # The bind address used by the HTTP service. # bind-address = ":8086" # Determines whether HTTP authentication is enabled. auth-enabled = true # Recommended, but not required [...] # The JWT auth shared secret to validate requests using JSON web tokens. shared-secret = "long pass phrase used for signing tokens"
2.3 Start the data service
sysvinit systems, enter:
service influxdb start
systemd systems, enter:
sudo systemctl start influxdb
Verify the data service is running
Check to see that the service is running by entering:
ps aux | grep -v grep | grep influxdb
You should see output similar to:
influxdb 2706 0.2 7.0 571008 35376 ? Sl 15:37 0:16 /usr/bin/influxd -config /etc/influxdb/influxdb.conf
If you do not see the expected output, the process is either not launching or is exiting prematurely. Check the logs for error messages and verify the previous setup steps are complete.
If you see the expected output, repeat for the remaining data nodes. After all of your data nodes have been installed, configured, and launched, move on to the next section to join the data nodes to the cluster.
Join the data nodes to the cluster
Join your data nodes to the cluster only when you are adding a brand new node,
either during the initial creation of your cluster or when growing the number of data nodes.
If you are replacing an existing data node using the
influxd-ctl update-data command, skip the rest of this guide.
Run the following commands on one of the meta nodes that you set up during meta nodes installation:
influxd-ctl add-data enterprise-data-01:8088 influxd-ctl add-data enterprise-data-02:8088
The expected output is:
Added data node y at enterprise-data-0x:8088
add-data command only once for each data node you are joining to the cluster.
Verify your data nodes installation
Issue the following command on any meta node:
The expected output is:
Data Nodes ========== ID TCP Address Version 4 enterprise-data-01:8088 1.5.4-c1.5.4 5 enterprise-data-02:8088 1.5.4-c1.5.4 Meta Nodes ========== TCP Address Version enterprise-meta-01:8091 1.5.4-c1.5.4 enterprise-meta-02:8091 1.5.4-c1.5.4 enterprise-meta-03:8091 1.5.4-c1.5.4
The output should list every data node that was added to the cluster.
The first data node added should have
N is equal to one plus the number of meta nodes.
In a standard three meta node cluster, the first data node should have
Subsequently added data nodes should have monotonically increasing IDs.
If not, there may be artifacts of a previous cluster in the metastore.
If you do not see your data nodes in the output, retry adding them to the cluster.
Once your data nodes are part of your cluster, proceed to installing Chronograf.
Support and feedback
Thank you for being part of our community! We welcome and encourage your feedback and bug reports for InfluxDB and this documentation. To find support, the following resources are available:
InfluxDB Cloud and InfluxDB Enterprise customers can contact InfluxData Support.