Install InfluxDB Enterprise data nodes

InfluxDB Enterprise offers highly scalable clusters on your infrastructure and a management UI for working with clusters. The next steps will get you up and running with the second essential component of your InfluxDB Enterprise cluster: the data nodes.

• Requirements
  • Two or more data nodes
  • License key or file
  • Networking
  • Load balancer
  • User account
• Set up data nodes
  1. Add DNS entries for each of your servers
  2. Set up, configure, and start the data node services
     1. Download and install the data service
     2. Edit the data node configuration files
     3. Start the data service
  3. Join the data nodes to the cluster
• Next steps

Requirements

• Two or more data nodes
• License key or file
• Networking
• Load balancer
• User account

Two or more data nodes

The installation process sets up two data nodes and each data node runs on its own server. You must have a minimum of two data nodes in a cluster. InfluxDB Enterprise clusters require at least two data nodes for high availability and redundancy.

See the Clustering guide for more on cluster architecture.

License key or file

InfluxDB Enterprise requires a license key or a license file to run. Your license key is available at InfluxPortal. Contact support at the email we provided at signup to receive a license file.

License files are required in the following conditions:

• Nodes in your cluster cannot reach portal.influxdata.com on port 80 or 443
• You’re using a FIPS-compliant InfluxDB Enterprise build

Networking

Data nodes communicate over ports 8088, 8089, and 8091.

For licensing purposes, data nodes must also be able to reach portal.influxdata.com on port 80 or 443. If the data nodes cannot reach portal.influxdata.com on port 80 or 443, you’ll need to set the license-path setting instead of the license-key setting in the data node configuration file.

Load balancer

InfluxDB Enterprise does not function as a load balancer. You will need to configure your own load balancer to send client traffic to the data nodes on port 8086 (the default port for the HTTP API).

User account

The installation package creates an influxdb user that is used to run the InfluxDB data service. The influxdb user also owns certain files that are needed for the service to start successfully. In some cases, local policies may prevent the local user account from being created and the service fails to start. Contact your systems administrator for assistance with this requirement.

Set up data nodes

1. Add DNS entries for each of your servers
2. Set up, configure, and start the data node services
   1. Download and install the data service
   2. Edit the data node configuration files
   3. Start the data service
3. Join the data nodes to the cluster

Add DNS entries for each of your servers

Ensure that your servers’ hostnames and IP addresses are added to your network’s DNS environment. The addition of DNS entries and IP assignment is usually site and policy specific. Contact your DNS administrator for assistance as necessary. Ultimately, use entries similar to the following:

Verify on each meta and data server that the other servers are resolvable. Here is an example set of shell commands using ping:

ping -qc 1 enterprise-meta-01
ping -qc 1 enterprise-meta-02
ping -qc 1 enterprise-meta-03
ping -qc 1 enterprise-data-01
ping -qc 1 enterprise-data-02

We highly recommend that each server be able to resolve the IP from the hostname alone as shown here. Resolve any connectivity issues before proceeding with the installation. A healthy cluster requires that every meta node and data node in a cluster be able to communicate.

Set up, configure, and start the data node services

Perform the following steps on each data node:

1. Download and install the data service
2. Edit the data node configuration files
3. Start the data service

Download and install the data service

InfluxDB Enterprise 1.11+ provides a standard build and a Federal Information Processing Standards (FIPS)-compliant build. Instructions for both are provided below.

Ubuntu and Debian (64-bit)

wget https://dl.influxdata.com/enterprise/releases/influxdb-data_1.11.3-c1.11.3-1_amd64.deb
sudo dpkg -i influxdb-data_1.11.3-c1.11.3-1_amd64.deb

wget https://dl.influxdata.com/enterprise/releases/fips/influxdb-data_1.11.3-c1.11.3-1_amd64.deb
sudo dpkg -i influxdb-data_1.11.3-c1.11.3-1_amd64.deb

RedHat and CentOS (64-bit)

wget https://dl.influxdata.com/enterprise/releases/influxdb-data-1.11.3_c1.11.3-1.x86_64.rpm
sudo yum localinstall influxdb-data-1.11.3_c1.11.3-1.x86_64.rpm

wget https://dl.influxdata.com/enterprise/releases/fips/influxdb-data-1.11.3_c1.11.3-1.x86_64.rpm
sudo yum localinstall influxdb-data-1.11.3_c1.11.3-1.x86_64.rpm

wget https://dl.influxdata.com/enterprise/releases/influxdb-data-1.11.3_c1.11.3-1.x86_64.rpm.asc

wget https://dl.influxdata.com/enterprise/releases/fips/influxdb-data-1.11.3_c1.11.3-1.x86_64.rpm.asc

Edit the data node configuration files

In /etc/influxdb/influxdb.conf:

• Uncomment hostname at the top of the file and set it to the full hostname of the data node.

• Uncomment meta-auth-enabled in the [meta] section and set it to true.

• Uncomment meta-internal-shared-secret in the [meta] section and set it to a long passphrase. The internal shared secret is used in JWT authentication for intra-node communication. This value must be same for all of your data nodes and match the [meta].internal-shared-secret value in the configuration files of your meta nodes.

• Set license-key in the [enterprise] section to the license key you received on InfluxPortal OR license-path in the [enterprise] section to the local path to the JSON license file you received from InfluxData.

  The license-key and license-path settings are mutually exclusive and one must remain set to the empty string.

If using a FIPS-compliant InfluxDB Enterprise build, also do the following:

• Set [enterprise].license-path to the local path to the JSON license file you received from InfluxData.
• Set [meta].password-hash to pbkdf2-sha256 or pbkdf2-sha512.

# Change this option to true to disable reporting.
# reporting-disabled = false
# bind-address = ":8088"
hostname="<enterprise-data-0x>"

[enterprise]
  # license-key and license-path are mutually exclusive, use only one and leave the other blank
  license-key = "<your_license_key>" # Mutually exclusive with license-path

  # The path to a valid license file.  license-key and license-path are mutually exclusive,
  # use only one and leave the other blank.
  license-path = "/path/to/readable/JSON.license.file" # Mutually exclusive with license-key

[meta]
  # Where the cluster metadata is stored
  dir = "/var/lib/influxdb/meta" # data nodes do require a local meta directory
...
  # This setting must have the same value as the meta nodes' meta.auth-enabled configuration.
  meta-auth-enabled = true

  # FIPS-compliant builds do not support bcrypt for password hashing
  password-hash = "pbkdf2-sha512"

[...]

[http]
  # Determines whether HTTP endpoint is enabled.
  # enabled = true

  # The bind address used by the HTTP service.
  # bind-address = ":8086"

[...]

  # The JWT auth shared secret to validate requests using JSON web tokens.
  shared-secret = "long pass phrase used for signing tokens"

Start the data service

service influxdb start

sudo systemctl start influxdb

ps aux | grep -v grep | grep influxdb

influxdb  2706  0.2  7.0 571008 35376 ?        Sl   15:37   0:16 /usr/bin/influxd -config /etc/influxdb/influxdb.conf

Join the data nodes to the cluster

On one and only one of the meta nodes that you set up, run the following command for each of your data nodes using the hostname of the data node and port 8088:

influxd-ctl add-data enterprise-data-01:8088

Run the add-data command once and only once for each data node you are joining to the cluster.

influxd-ctl show

Data Nodes
==========
ID   TCP Address               Version
4    enterprise-data-01:8088   1.11.3-c1.11.3
5    enterprise-data-02:8088   1.11.3-c1.11.3

Meta Nodes
==========
TCP Address               Version
enterprise-meta-01:8091   1.11.3-c1.11.3
enterprise-meta-02:8091   1.11.3-c1.11.3
enterprise-meta-03:8091   1.11.3-c1.11.3

Next steps

Once your data nodes are part of your cluster, do the following:

• Set up authentication. Once you cluster is configured for authentication, if you want to add more users in addition to admin user, see Manage users and permissions.
• Enable TLS.
• Set up Chronograf for UI visualization, dashboards, and management.