Transform data with mathematic operations

This page documents an earlier version of InfluxDB. InfluxDB v2 is the latest stable version. See the equivalent InfluxDB v2 documentation: Transform data with mathematic operations.

Flux supports mathematic expressions in data transformations. This article describes how to use Flux arithmetic operators to “map” over data and transform values using mathematic operations.

If you’re just getting started with Flux queries, check out the following:

Basic mathematic operations
// Examples executed using the Flux REPL
> 9 + 9
> 22 - 14
> 6 * 5
> 21 / 7

See Flux read-eval-print-loop (REPL).

Operands must be the same type

Operands in Flux mathematic operations must be the same data type. For example, integers cannot be used in operations with floats. Otherwise, you will get an error similar to:

Error: type error: float != int

To convert operands to the same type, use type-conversion functions or manually format operands. The operand data type determines the output data type. For example:

100 // Parsed as an integer
100.0 // Parsed as a float

// Example evaluations
> 20 / 8

> 20.0 / 8.0

Custom mathematic functions

Flux lets you create custom functions that use mathematic operations. View the examples below.

Custom multiplication function
multiply = (x, y) => x * y

multiply(x: 10, y: 12)
// Returns 120
Custom percentage function
percent = (sample, total) => (sample / total) * 100.0

percent(sample: 20.0, total: 80.0)
// Returns 25.0

Transform values in a data stream

To transform multiple values in an input stream, your function needs to:

The example multiplyByX() function below includes:

  • A tables parameter that represents the input data stream (<-).
  • An x parameter which is the number by which values in the _value column are multiplied.
  • A map() function that iterates over each row in the input stream. It uses the with operator to preserve existing columns in each row. It also multiples the _value column by x.
multiplyByX = (x, tables=<-) =>
    |> map(fn: (r) => ({
        r with
        _value: r._value * x

  |> multiplyByX(x: 10)


Convert bytes to gigabytes

To convert active memory from bytes to gigabytes (GB), divide the active field in the mem measurement by 1,073,741,824.

The map() function iterates over each row in the piped-forward data and defines a new _value by dividing the original _value by 1073741824.

from(bucket: "db/rp")
  |> range(start: -10m)
  |> filter(fn: (r) =>
    r._measurement == "mem" and
    r._field == "active"
  |> map(fn: (r) => ({
      r with
      _value: r._value / 1073741824

You could turn that same calculation into a function:

bytesToGB = (tables=<-) =>
    |> map(fn: (r) => ({
        r with
        _value: r._value / 1073741824

  |> bytesToGB()

Include partial gigabytes

Because the original metric (bytes) is an integer, the output of the operation is an integer and does not include partial GBs. To calculate partial GBs, convert the _value column and its values to floats using the float() function and format the denominator in the division operation as a float.

bytesToGB = (tables=<-) =>
    |> map(fn: (r) => ({
        r with
        _value: float(v: r._value) / 1073741824.0

Calculate a percentage

To calculate a percentage, use simple division, then multiply the result by 100.

> 1.0 / 4.0 * 100.0

For an in-depth look at calculating percentages, see Calculate percentages.

Pivot vs join

To query and use values in mathematical operations in Flux, operand values must exists in a single row. Both pivot() and join() will do this, but there are important differences between the two:

Pivot is more performant

pivot() reads and operates on a single stream of data. join() requires two streams of data and the overhead of reading and combining both streams can be significant, especially for larger data sets.

Use join for multiple data sources

Use join() when querying data from different buckets or data sources.

Pivot fields into columns for mathematic calculations
  |> pivot(rowKey:["_time"], columnKey: ["_field"], valueColumn: "_value")
  |> map(fn: (r) => ({ r with
    _value: (r.field1 + r.field2) / r.field3 * 100.0
Join multiple data sources for mathematic calculations
import "sql"
import "influxdata/influxdb/secrets"

pgUser = secrets.get(key: "POSTGRES_USER")
pgPass = secrets.get(key: "POSTGRES_PASSWORD")
pgHost = secrets.get(key: "POSTGRES_HOST")

t1 = sql.from(
  driverName: "postgres",
  dataSourceName: "postgresql://${pgUser}:${pgPass}@${pgHost}",
  query:"SELECT id, name, available FROM exampleTable"

t2 = from(bucket: "db/rp")
  |> range(start: -1h)
  |> filter(fn: (r) =>
    r._measurement == "example-measurement" and
    r._field == "example-field"

join(tables: {t1: t1, t2: t2}, on: ["id"])
  |> map(fn: (r) => ({ r with _value: r._value_t2 / r.available_t1 * 100.0 }))

Was this page helpful?

Thank you for your feedback!

The future of Flux

Flux is going into maintenance mode. You can continue using it as you currently are without any changes to your code.

Flux is going into maintenance mode and will not be supported in InfluxDB 3.0. This was a decision based on the broad demand for SQL and the continued growth and adoption of InfluxQL. We are continuing to support Flux for users in 1.x and 2.x so you can continue using it with no changes to your code. If you are interested in transitioning to InfluxDB 3.0 and want to future-proof your code, we suggest using InfluxQL.

For information about the future of Flux, see the following: